Eske med Hyller

Da har jeg prøvd ut noe helt nytt, jeg prøvde meg på en boks med hyller inni ! 

Først måtte jeg følge malen til punkt og prikke, deretter finne frem ting jeg ville dekorere selve boksen med utvendig. Syns selv det ble ganske bra til å være mitt første, dette laget jeg til en kollega på skolen jeg er renholder på. Hun er sekretæren, fått veldig god kontakt, slik en trivelig og flott dame.

Så jeg syntes hun fortjener noe ekstra godt til Sommeren :)

Her er kortet ihvertfall !

Her har jeg laget ferdig kortet innvendig etter malen, hyllene var vanskelige men fikk det til tilslutt.

Laget en Tag som "kort" til boksen.

Dieset ut fra Magnolias Doohickey volume 3 dies, LoveBirds

Dieset ut en blomst jeg fant liggende i artbin min, veldig fin, skjønner ikke hvorfor jeg ikke har brukt den tidligere, litt tynn i stilkene så er nok derfor.

Diesen her vises ikke så veldig, men er fra Magnolias Doohickey volume 3, BirdCage.

Toppen av lokket pyntet jeg med en blomst, denne er stemplet med archival black, drysset over med clear stamps powder og brukte varmepistolen på slik at det smeltet sammen. Farget med distress.

Innsiden, fyllt opp hyllene med godis, hårspenner og hårstrikk.

Dette var en ny erfaring, håper på å lage enda flere kule ting !

Gjerne kommenter :) 

12 Tags of 2015 - TimHoltz- June

Hehey people !

Just made it through with my June tag ! That was awesome. Offcourse I've missed a couple of things in this tag cause I haven't all the things Tims got. So I used my imagination and created what I could make out of what I have :D 

Hope you'll like my tag for June !

Supplies I used: 

- Surfaces: #8 manila tag, burlap, plastic packaging,akvarell paper, brown paper

- Layering stencil: THS016 Harlequin

- stamps: hashtag norwegian

- embellishments: diamond heart, linen ribbon, jute string, loop pins, typed token, straw

- distress ink pad: DIY distress it yourself, walnut stain, peacock feathers

- distress re-inkers: mowed lawn, pine needles, peeled paint

- distress spray stain: picket fence

- alcohol ink: mushroom

- tools: scissors, mini ink blending tool, craft scraper, heat tool, ruler, pencil, staz on

-adhesive: wonder tape and scotch glue

First I inked the distress it yourself pad with my three re-inkers, scraped it into the pad

And then I dipped the front on the stamp to show the colors on the outside

I forgot to take a picture, but I stamped this stencil with the distress it yourself pad and putted on the card.

I also forgot to take a picture of coloring the surface of the manila tag, but I just put a picture here of the manila tag so you can see.

Like this, this is how it turned out after putting the stencil over with the distress it yourself pad.

Then I used the craft scraper on the edges of the tag

And inked the edges with my walnut stain mini distresser

I used staz on jet black on the Hashtag #smakepå (#tasteit) on a brown paper

Since I don't have the starbucks coffee dies, I simply had to use the old fashioned way and cut it out, here I used a ruler, scissors and my pencil.

Making the middle of the cup with my pencil and a piece of brown paper

Here I make the round paper dot using my mini distress stamper as a round thing.

Coloring it with my mini distress Peacock feathers

There you go, almost like a coffee cup, I think it turned out ok since I don't have the dies.. 

Using some adhesive tape on the backside, also take the straw on the backside 

Here I putted on picket fence color on a plastic piece to be the top of the cup

Glued on the burlap at the bottom, glued on the hashtag and stitched it up together

On the diamond heart embellisment I used some alcohol ink mushroom to bring the great figures.

Pin it to remember it, as Tim always says ! This is my ending result ! 

Thank you for looking, and also thanks for a comment or two :) 

12 Tags of 2015 - TimHoltz - May

Juhuu, da har jeg hatt en skikkelig god ferie i London !!

Deilig å være tilbake å starte på scrappingen, klødde skikkelig i henda da jeg fikk se utfordringen inne på bloggen til Tim Holtz 1 Mai.

Har besøkt Big Ben, Buckingham Palace, Tower Bridge, Tower of London, London Eye, Westminister Abbey, Oxford Street, British Museum, Madame Tussauds, Baker Street, St James Park, London Zoo og Blade Rubber Stamp scrappebutikk *gliser* 

Her er mitt bidrag til denne månedens utfordring !

Hellow, now I'm back home from a fantastic vacation in London !!

Wonderful to be home again with such good memories from this trip, but I feel somethings been missing and that's making this months tag, wich he actually posted on his blog 1th of May.

I've been visiting (look on norwegian, big ben aso...) Blade rubber stamps *smiling*

This is my Tag of this month ! 

Supplies I've used; 

- Picture from google, home printed

- Distress Vintage photo, Scattered Straw, Peacock feathers, Black soot and Walnut stain

- Staz on jet black, acryllic block

- Stamps from TH

- Glue N Seal

- Different papers 

- "Strie" almost the same as the Burlap TH uses

- alphabetic stencil with palette knife

- Texture Paste

- Memo pin, Token with word and mini fastener

- Straw"ish" thread and cream ribbon

- Different flowers from my flower box with glue pistol

- Sand Paper fine

(I think that was it, but in case I forgot something it's probably in my pictures :)

1. I glued the "Strie" on my tag with glue n seal matte

So it looks like this after cutting the edges

2. Add some texture paste on the tag with the alphabetic stencil and palette knife

3. Distress the texture paste after drying with peacock feathers

4. Distress the edges of the tag with some Vintage photo

5. Cut out some different papers and distress them also with vintage photo

6. After gluing them on the tag, take some glue n seal matte over the papers

7. While the tag is drying, you can start by making the photo pretty for the tag.

8. Paint with distress colors on her shirt and also some yellow on the backround

9. Use your cotton stick to drag the colors over the picture and make them lighter

10. Use some sand paper to make the edges look older thank they actually are

11. Now your photo look abit older and are ready to be put on to the Tag

12. I just stamped up some words, dragged antique linen over the words and glued them on

13. Stamped on some stamps on the picture with staz on, staz on dries faster and holds better on glossy  papers or photos

14. Here I forgot to take a photo, but I colored the ribbon with vintage photo and walnut stain, sprayed on some water and crunched it together. Squeezed out the water and now drying it

15. Using my heating tool, drying the ribbon will go faster

16. So this is how it looks like when it's completly dry, pretty huh? 

17. Tie the ribbon around the card and make a pretty loop

18. Using the memo pin with token and a mini fastener, I simply attach the photo into the ribbon, whithout using any glue. And I hang up two buttons with another pin with a bow on under the loop of the ribbon.

19. Since I don't have any dies to make flowers with, I had to use some of my own flowers

20. By using black soot distress with water, I can make "drops" on my tag

21. And yes offcourse, I don't have any spritzer so I have to make this black soot water "dot" so I can simply use my blue "spritzer" (as I call it cause I don't have anything else) to make drops

22. making drops on my tag, the last finish !!!!

23. The tag is finished, what you think? Pretty cool !

24. A great ending result, so this is my Tag for May.

Feel free to give me some comments, and Thank You :-) 

12 Tags of 2015 - TimHoltz - April

Ja da har jeg klenget meg på Tim Holtz sin utfordring atter en gang, selvom jeg ikke hadde alt utstyret han bruker så syns jeg at jeg klarte oppgaven ganske fint egentlig :)

God Påske, Snart er det sommer :D

Well, then I have made a Tag once again for Tim Holtz challenge, April this time. Even though I didn't have everything he uses, I think I still made the best out of it and made a pretty Tag after all :)

Happy Easter, soon the summer will be here :D 

Here's what I used;

- Paper, dark brown and akvarell white

- Clear Stamp Flowers

- Archival Black

- Distress : Black Soot, Aged Mahogny, Peeled Paint, Faded Jeans,Weathered Wood, Barn Door and Fired Brick

- Acrylic Color Vandyke Brown

- Flower 3D sticker

- Recollections cutting knife

- Die with word ; Love

- Alphabet dies

- Cuttlebug with plates : A,B,C and metal

- Small spray flask filled with water

- Pencil brush filled with water

- Heat tool

- Baking mat

- Distress ink; Walnut Stain and Black Soot

- (I don't know what it is, but will be shown in picture) a Blue thing I use as spritzer

- Tim Holtz edge cutter

- Xyron Sticker

- Glue N'seal

- Needle and black thread

- Vintage Seam Binding Ribbon - Cream

Here comes pictures from how I did things, hope you'll enjoy :) 

First I used my clear stamp and stamped the whole stamp on top and half in the side.

I used archival black on this stamp.

I die cutted the word Love on the Tag.

Then I cutted on top of the word and at the bottom.

I used my distress markers and sprayed on some color, this was a bit difficult since I don't have the spritzer, so I simply used a spray on the markers.

This is the result of using spray and distress, pretty neat huh?! 

Found my cool colors, strong and beautiful.

First use markers(aged mahogny) on motive to make a strong color.

Then use the pencil brush with water to make the colors float together.

Use a heat tool to make colors dry.

Put some marker color(aged mahogny) on the baking mat( I use baking mat because it doesn't suck the color in like paper does)

Take the pencil brush in the color.

Finish the colors on the motive with the pencil brush.

Put on peeled paint on the stilks, and use pencil brush to make the color lighter.

I used Black soot to make an "shadow" on the motive, so I had to put some of this color on the baking mat, to use with pencil brush.

Pencil brush with black soot on will make a pretty cool shadow on the motive.

Use distress ink on the edges to make the card "pop" when you put it on the tag.

To make the perfect finish, you spray on water at the black soot color and then use the blue thing to dip in the color.

Give the blue thing a little knock all over the paper and it makes some awesome black dots.

Heat the dots up to make it dry faster.

Put on distress ink walnut stain on the edges of the tag as well.

Then use the edge cutter to make a riffled edge around the tag.

Die cut out the alphabet on akvarel paper.

Take the words F L O W, and put them in the Xyron machine.

Voila, glue on the back side of the words.

Put the paper with the motive under the cutted egde around the die cutted Love.

I used Glue N'seal because I wanted to heat it up to dry faster, normal glue will bubble.

Since I don't own any sew machine, I have to do this on the old fashioned way.. Needle and Thread.

Went out pretty awesome I think, hehe..

On the ribbon I used the color Barn Door...

And the color Fired Brick...

Sprayed it with water...

And curled it up together to a little ball, heated it up with my heat tool.

Let it air dry a little before putting it on the card.

Just for fun, I used acrylic color on a flower 3D sticker to make it darker.

Black soot on the F L O W die cuts.

And putted all on the TAG, this is my final result.. What you think?! Thanks for watching :)